Table of Contents
Advertisement
Image title bar
3A-54
The Image title bar contains the current image number. The format of the
image number (0 or 1 based) is defined in the Application Setup> Images-
Native Scan Structure.
When you right-click on the Image Title bar, the context-sensitive menu with
the option Properties appears.
Properties provides access to the following information for each image:
• Front or rear
• Page ID within the batch
• Location on disk
• Compression
• Resolution
• Image size in bytes, pixels by pixels, 1/100 inch x 1/100 inch, or in mm x mm
• Degrees of skew correction (when performed by the scanner or by Capture
Software) applied to the image
• Skew Correction status (Scanner 3520 and i800 Series Scanners only)
NOTE: Skew correction is not reported at this time for color images that have
been deskewed by Capture Software.
• Print string when printing is enabled for the Scanner 3520 DP, Color
Scanner 4500DP, or an i800 Series Scanner
• Image Address (i800 Series Scanners only)
• Sequential Counter (i800 Series Scanners only)
• Patch code type detected by the scanner (i800 Series Scanners only)
• List of detected bar code or OCR text values (by launching the bar code/
OCR engine when Properties is called). Only bar codes or OCR text
zones defined through Bar Code/OCR Setup appear. Hardware bar
codes that are read by a Kodak high volume scanner are not displayed
in Image Properties.
NOTE: Bar code detection and OCR are not available for Capture
Software Lite for Scanner 1500/2500.
A-63054 February 2004
Advertisement
Table of Contents
