Table of Contents
Advertisement
Setting OCR zone
properties
6-24
OCR zones provide Capture Software with information such as dimensions of
the zone. After you draw an OCR zone, Capture Software attempts to read the
information in the zone and automatically displays the OCR Zone Properties
window with whatever text Capture Software could read in the zone.
When the OCR Zone Properties window is displayed, follow the procedures
below to further define the zone properties:
1. Enter a name for the OCR zone in the Label field.
This name identifies the text zone and appears in Index setup as
OCR_[Label] in the list of default values. To assign an OCR value to an
index field, refer to "Index setup tab — Default values" in Chapter 4.
IMPORTANT: The OCR label does not define or identify an Capture Software
Index field. In Application Setup, all index fields must be defined
in the Index tab. To use an OCR zone for an index field, you
must assign the appropriate OCR_[Label] as a default value for
the index field.
2. Specify an option in the Separation and Deletion group box.
3. Click OK.
A-63054 February 2004
Advertisement
Table of Contents
