Scanner Bar; Default Scanner Bar - Kodak 8342693 - Capture Software - PC User Manual

Scanner bar

Default Scanner bar

3C-30
The Scanner bar provides tools for controlling the scanner from within Capture
Software. If the Scanner bar is not visible, open the Options menu and click on
the Scanner bar option. The Scanner bar displayed below is for a duplex
scanner scanning both sides of the page.
The Default Scanner bar provides the following options.
Button
NOTE: Color and grayscale scanning cannot be enabled at the same time.
Enabling color scanning disables grayscale and vice-versa.
Description
Stop—clears and stops the transport/feeder and
disables the scanner.
Start—enables the scanner and starts the
transport feeder.
Classic—duplex scanning format typically
associated with multi-page reports. Reports,
postcards, articles, etc., are all printed according
to the classic duplex format.
Calendar—duplex scanning format typically used
for presentation handouts, statistical and financial
reports, project planning reports, etc.
NOTES: Calendar duplex mode is not available for
Capture Software Lite for i200 Series Scanners.
Calendar duplex mode is not available when color or
grayscale scanning.
Page—displays the current/active page setup.
Use the drop-down list button to select a different
page setup.
Bitonal scanning—select the Front and Rear
buttons to enable/disable front and/or rear
bitonal scanning.
Grayscale scanning—select the Front and
Rear buttons to enable/disable front and/or rear
grayscale scanning.
Color scanning—select the Front and Rear
buttons to enable/disable front and/or rear
color scanning.
A-63054 February 2004