Using the Patch
Setup dialog box
5-2
To access the Patch Setup dialog box, follow the steps below.
1. From the Capture Software main window, select the application for which
you want to set up patch information.
2. Access the Application Setup dialog box.
3. Select the Setup Patch icon
the window.
The Patch Setup dialog box appears.
4. Select the tab(s) with the patch type(s) you want to define: Patch 2,
Patch 3, or Patch T.
5. Enable all desired options on the tab. (See the following explanations of
each option on the Patch tabs.)
6. Click OK.
located in the upper right corner of
A-63054 February 2004