Scanner Bar; Default Scanner Bar - Kodak 8342693 - Capture Software - PC User Manual

Scanner bar

Default Scanner bar

A-63054 February 2004
The Scanner bar provides tools for controlling the scanner from within Capture
Software. If the Scanner bar is not visible, open the Options menu and click on
the Scanner bar option. The Scanner bar displayed below is for a duplex
scanner scanning both sides of the page.
The Default Scanner bar provides the following options.
Button Description
Stop—clears and stops the transport/feeder and
disables the scanner.
Start—enables the scanner and starts the
transport feeder.
Classic—duplex scanning format typically
associated with multi-page reports. Reports,
postcards, articles, etc., are all printed according
to the classic duplex format.
Calendar—duplex scanning format typically used
for presentation handouts, statistical and financial
reports, project planning reports, etc.
NOTES: Calendar duplex mode is not available for
Capture Software Lite for i50/i60/i80 Scanners.
Calendar duplex mode is not available when color or
grayscale scanning.
Page—displays the current/active page setup.
Use the drop-down list button to select a different
page setup.
Front—select this option to enable/disable simplex,
front only scanning.
Rear—select this option to enable/disable simplex,
rear only scanning.
3B-29