Table of Contents
Advertisement
6 Bar Code/OCR Setup
Bar Code/OCR Setup
window for bar codes
and OCR
A-63054 February 2004
Use Bar Code/OCR Setup to set up bar code reader for one or more bar codes
or OCR indexing parameters for one or more OCR zones.
Bar code setup allows you to define the following:
• the name of the bar code
• the data mask or syntax
• the physical location where you find the bar code (zone or anywhere on
the image)
• the bar code type (width, height, quality, and confidence level)
• the level where you can find the bar code (batch, document, or page level)
OCR indexing setup allows you to define the following:
• the name of the OCR zone
• the physical location where you find the text (zone location on the image)
• the level where you can find the text (batch or document level)
NOTES: Bar code or OCR indexing applications cannot be used with Low
Volume Capture Software Lite (Scanner 1500 and Scanner 2500),
Capture Software Lite for i50/i60/i80 Scanners, or Capture Software
Lite for i200 Series Scanners.
For bar code or OCR reading when color or grayscale scanning,
refer to Chapter 7, Bar Codes, Patch Codes, and OCR Indexing
with Color Scanners.
To access the Bar Code/OCR Setup window for specifying bar codes or OCR
zones, follow the steps below.
1. From the Capture Software main window, select the application for
which you want to set bar code/OCR information.
2. Access the Application Setup dialog box.
3. Click the Bar Code/OCR Setup button.
6-1
Advertisement
Table of Contents
