Unit Identifier Switch/Uid Led Indicator; Vga Port - Supermicro X10SRL-F User Manual

X10SRL-F User's Manual

Unit Identifier Switch/UID LED Indicator

A Unit Identifier (UID) switch and an LED
Indicator are located on the motherboard.
The UID switch is located next to the VGA
port on the back panel. The UID LED (LE1)
is located next to the UID switch. When you
press the UID switch, the UID LED will be
turned on. Press the UID switch again to
turn off the LED indicator. The UID Indicator
provides easy identification of a system unit
that may be in need of service.
Note: UID can also be triggered via
IPMI on the motherboard. For more
information on IPMI, please refer to
the IPMI User's Guide posted on
our website at http://www.super-
micro.com.

VGA Port

The onboard VGA port is located next to
LAN Ports 1/2 on the I/O backpanel. Use
the connection for VGA display.
BMC
LEDM1
SP1
USB4/5
USB6/7
USB8/9
JBT1
JP3
JIPMB1
IPMI
Intel PCH
I-SATA5
JSD2
S-SATA3
S-SATA2
JSD1
T-SGPIO3
T-SGPIO2
T-SGPIO1
USB10(3.0)
FANA I-SATA3 I-SATA2 I-SATA1 I-SATA0
B
A
C
UID LED - LE1
UID - SW VGA
JPL2
BT1
X10SRL-F
Rev: 1.01
DESIGNED IN USA
JSTBY1
5V STBY
1
JOH1 JL1
JD1
LE2
JF1
FAN4 FAN3
USB11(3.0)
2-20
Pin#
1
2
3
4
Color/State Status
Blue: On
USB2/3(3.0)
USB0/1
LAN2 LAN1 IPMI_LAN
LAN
CTRL
JVR1
JPL1
LAN
CTRL
CPU
BAR CODE
IPMI CODE
BIOS LICENSE
MAC CODE
FAN2 FAN1
UID Switch
Definition
Ground
Ground
Button In
Button In
UID LED
Status
Unit Identified
A. VGA
B. UID Switch
C. UID LED
COM1
FAN5
JPI2C1
JWD1