Advance Screen - ZyXEL Communications NBG-419N User Manual

Chapter 9 WISP Mode

9.5.3 Advance Screen

Use this screen to enable the power saving mode of your NBG-419N. Go to Configuration >
Wireless LAN to open the following screen.
Figure 57 Configuration > Wireless LAN > Advance Screen (WISP)
The following table describes the labels in this screen.
Table 35 Configuration > Wireless LAN > Advance Screen (WISP)
LABEL
Power Saving
Mode
RTS Threshold
Fragment
Threshold
Apply
Reset
74
DESCRIPTION
Select CAM (Constantly Awake Mode) if you do not want your NBG-419N to go
to "sleep" when no wireless activity is detected in the Wireless LAN.
Select Power Saving Mode if you want the NBG-419N to go to sleep when no
wireless connection is needed for a period of time. This means the NBG-419N
consumes less electrical power.
This is the maximum data fragment size that can be sent in a wireless network
before the AP fragments the packet into smaller data frames.
This value controls how often wireless clients must get permission to send
information to the AP. The lower the value, the more often the wireless clients must
get permission. If this value is greater than the fragmentation threshold value, then
wireless clients never have to get permission to send information to the AP.
Click Apply to save your changes back to the NBG-419N.
Click Reset to reload the previous configuration for this screen.
NBG-419N User's Guide