The Broadband Advanced Screen - ZyXEL Communications VMG Series User Manual

Table 34 Network Setting > Broadband > Cellular Backup (continued)
LABEL
Data Budget
% of time
budget/data
budget
(Mbytes)/data
budget
(kPackets)
Actions when
over budget
Current Cellular
connection
Actions
Enable Email
Notification
Mail
Account
Cellular
Backup
Email Title
Send
Notification
to Email
Interval
Enable Log
Cancel
Apply

6.4 The Broadband Advanced Screen

Use the Advanced screen to enable or disable ADSL over PTM, Annex M, DSL PhyR, and SRA (Seamless
Rate Adaptation) functions. The Zyxel Device supports the PhyR retransmission scheme. PhyR is a
retransmission scheme designed to provide protection against noise on the DSL line. It improves voice,
video and data transmission resilience by utilizing a retransmission buffer. It also lists ITU-T G.993.2
standard VDSL profiles you can comply with.
ITU-T G.993.2 standard defines a wide range of settings for various parameters, some of which are
encompassed in profiles as shown in the next table.
Chapter 6 Broadband
DESCRIPTION
Select the check boxes and enter a number from 1 to 99 in the percentage fields. If you change
the value after you configure and enable budget control, the Zyxel Device resets the statistics.
Specify the actions the Zyxel Device takes when the time or data limit is exceeded.
Select Keep to maintain an existing cellular connection or Drop to disconnect it.
Click this switch to enable or disable the email notification function. When the switch goes to the
right , the function is enabled. Otherwise, it is not.
The Zyxel Device will email you a notification whenever over budget occurs.
Select an email address you have configured in Maintenance > Email Notification. The Zyxel
Device uses the corresponding mail server to send notifications.
You must have configured a mail server already in the Maintenance > Email Notification screen.
Type a title that you want to be in the subject line of the email notifications that the Zyxel Device
sends.
Notifications are sent to the email address specified in this field. If this field is left blank,
notifications cannot be sent via email.
Type the interval of how many minutes you want the Zyxel Device to email you.
Select this to activate the logging function at the interval you set in this field.
Click Cancel to return to the previous configuration.
Click Apply to save your changes back to the Zyxel Device.
VMG/XMG Series User's Guide
138