Figure 57 LAN and WAN IP Addresses
The LAN parameters of the LTE Device are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS server
address(es), read the embedded Web Configurator help regarding what fields need to be configured.
8.4 LAN IP Screen
Use this screen to change the IP address for your LTE Device. Click Configuration > Network > LAN > IP.
Figure 58 Configuration > Network > LAN > IP
The following table describes the labels in this screen.
Table 35 Configuration > Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Cancel
Apply
Chapter 8 LAN
LTE
DESCRIPTION
Type the IP address of your LTE Device in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your LTE Device will
automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the LTE Device.
Click Cancel to begin configuring this screen afresh.
Click Apply to save your changes back to the LTE Device.
LTE3302-M432 & LTE3312-M432 User's Guide
89