Advanced Screen - ZyXEL Communications NBG-419N User Manual

Chapter 14 DHCP Server
Table 56 Network > DHCP Server > General
LABEL
Apply
Reset

14.4 Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
NBG-419N sends to the DHCP clients.
To change your NBG-419N's static DHCP settings, click Network > DHCP Server > Advanced.
The following screen displays.
Figure 92 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Table 57 Network > DHCP Server > Advanced
LABEL
LAN Static DHCP Table
#
MAC Address
IP Address
122
DESCRIPTION
Click Apply to save your changes back to the NBG-419N.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
Type the LAN IP address of a computer on your LAN.
NBG-419N User's Guide