ZyXEL Communications NBG-419N User Manual page 58

Chapter 7 Router Mode
Table 27 Navigation Panel: Router Mode
LINK
Remote
Management
UPnP
MAINTENANCE
General
Password
Time
Remote
Management
Firmware
Upgrade
Backup/
Restore
Reset/
Restart
Sys OP Mode
58
TAB FUNCTION
Use this screen to be able to access the NBG-419N
WWW
from the LAN, WAN or both.
General Use this screen to enable UPnP on the NBG-419N.
Use this screen to view and change administrative settings such
as system and domain names.
Password Use this screen to change the password of your NBG-419N.
Setup
Time Setting Use this screen to change your NBG-419N's time and date.
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the NBG-
419N.
Use this screen to upload firmware to your NBG-419N.
Use this screen to backup and restore the configuration or reset
the factory defaults to your NBG-419N.
Restart This screen allows you to reboot the NBG-419N without turning
the power off.
This screen allows you to select whether your device acts as a
Router or a Access Point.
NBG-419N User's Guide