Lan Ip Screen; Ip Alias Screen - ZyXEL Communications NBG-419N User Manual

13.4 LAN IP Screen

Use this screen to change the IP address for your NBG-419N. Click Network > LAN > IP.
Figure 89 Network > LAN > IP
The following table describes the labels in this screen.
Table 54 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Reset

13.5 IP Alias Screen

Use this screen to have the NBG-419N apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 90 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 55 Network > LAN > IP Alias
LABEL
IP Alias
IP Address
NBG-419N User's Guide
DESCRIPTION
Type the IP address of your NBG-419N in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your
NBG-419N will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the NBG-419N.
Click Apply to save your changes back to the NBG-419N.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Check this to enable IP alias.
Type the IP alias address of your NBG-419N in dotted decimal notation.
Chapter 13 LAN
119