ZyXEL Communications NBG-419N User Manual page 55

Table 26 Status Screen: Router Mode
LABEL
- WPS
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
- Configuration Mode
Interface Status
Interface
Status
Rate
Summary
BW MGMT Monitor
DHCP Table
NBG-419N User's Guide
DESCRIPTION
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
This column shows the type of data the NBG-419N is recording.
This column shows the actual data recorded by the NBG-419N.
This is the total time the NBG-419N has been on.
This field displays your NBG-419N's present date and time.
This displays what percentage of the NBG-419N's processing ability is currently
used. When this percentage is close to 100%, the NBG-419N is running at full load,
and the throughput is not going to improve anymore. If you want some applications
to have more throughput, you should turn off other applications (for example,
using bandwidth management.)
This shows what percentage of the heap memory the NBG-419N is using.
This shows whether the firewall is enabled or not.
This shows whether the bandwidth management is enabled or not.
This shows whether UPnP is enabled or not.
This shows the web configurator mode you are viewing - Expert.
This displays the NBG-419N port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up
or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN
is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field
displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Click Details... to go to the Monitor >
(Section 4.3 on page 35).
network bandwidth that applications running in the network are
using.
Click Details... to go to the Monitor >
on page 36). Use this screen to view current DHCP client information.
BW MGMT Monitor screen
Use this screen to view the amount of
DHCP Table screen
Chapter 7 Router Mode
(Section 4.4
55