ZyXEL Communications NBG-419N User Manual page 91

In order to configure and enable WEP encryption, click Network > Wireless LAN to display the
General screen. Select Static WEP from the Security Mode list.
Figure 70 Network > Wireless LAN > General: Static WEP
The following table describes the wireless LAN security labels in this screen.
Table 39 Network > Wireless LAN > General: Static WEP
LABEL
Security Mode
PassPhrase
WEP
Encryption
NBG-419N User's Guide
DESCRIPTION
Select Static WEP to enable data encryption.
Enter a Passphrase (up to 26 printable characters) and click Generate.
A passphrase functions like a password. In WEP security mode, it is further
converted by the NBG-419N into a complicated string that is referred to as the
"key". This key is requested from all devices wishing to connect to a wireless
network.
Select 64-bit WEP or 128-bit WEP.
This dictates the length of the security key that the network is going to use.
Chapter 11 Wireless LAN
91