Packet Statistics - ZyXEL Communications NBG-419N User Manual

The following table describes the labels in this screen.
Table 15 Summary: DHCP Table
LABEL
#
MAC Address
IP Address
Expires in
Refresh

4.5 Packet Statistics

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status, packet specific statistics and the "system up time". The Poll Interval(s)
field is configurable and is used for refreshing the screen.
Figure 24 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 16 Summary: Packet Statistics
LABEL
Port
Status
TxPkts
NBG-419N User's Guide
DESCRIPTION
This is the index number of the host computer.
This field shows the MAC address of the computer with the name in the Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which
uniquely identifies a device. The MAC address is assigned at the factory and consists
of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
This field displays the IP address relative to the # field listed above.
This field displays the time when the IP address and MAC address association ends.
Click Refresh to renew the screen.
DESCRIPTION
This is the NBG-419N's port type.
For the LAN ports, this displays the port speed and duplex setting or Down
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a
call) and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation.
This field displays Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
Chapter 4 Monitor
37