Connection Type: L2Tp - ZyXEL Communications NBG-419N User Manual

Chapter 2 Connection Wizard
The following table describes the fields in this screen
Table 6 Internet Connection Type: PPTP
LABEL
Internet
Connection Type
Dynamic IP
Static IP
PPTP Address
PPTP Subnet Mask
PPTP Gateway IP
Address
PPTP Server IP
Address
User Name
Password
Exit
Back
Next

2.3.5 Connection Type: L2TP

The Layer 2 Tunneling Protocol (L2TP) works at layer 2 (the data link layer) to tunnel network traffic
between two peer devices over another network (like the Internet).
Internet Connection Type: L2TP
Figure 11
The following table describes the fields in this screen
Table 7 Internet Connection Type: L2TP
LABEL
Internet
Connection Type
Dynamic IP
24
DESCRIPTION
Select PPTP from the drop-down list box. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
Select this radio button if your ISP did not assign you a fixed IP address.
Select this radio button, provided by your ISP to give the NBG-419N a fixed,
unique IP address.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Type the gateway IP address of the PPTP server.
Type the server IP address of the PPTP server.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
DESCRIPTION
Select L2TP from the drop-down list box.
Select this radio button if your ISP did not assign you a fixed IP address.
NBG-419N User's Guide