ZyXEL Communications NBG-419N User Manual page 62

Chapter 8 Access Point Mode
The following table describes the labels shown in the Status screen.
Table 28 Status Screen: Access Point Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
- WLAN OP Mode
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Configuration Mode
Interface Status
Interface
62
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the System Name you enter in the Maintenance > General screen. It is
for identification purposes.
This is the firmware version and the date created.
This is the device mode (Section 5.1.2 on page
Access Point Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server, Client or None.
This is the device mode (Section 5.1.2 on page
wireless LAN is set - Access Point Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON or OFF.
This shows a descriptive name used to identify the NBG-419N in the wireless LAN.
This shows the channel number which you select manually.
This shows the channel number which the NBG-419N is currently using over the
wireless LAN.
This shows the level of wireless security the NBG-419N is using.
This shows the wireless standard.
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
This column shows the type of data the NBG-419N is recording.
This column shows the actual data recorded by the NBG-419N.
This is the total time the NBG-419N has been on.
This field displays your NBG-419N's present date and time.
This displays what percentage of the NBG-419N's processing ability is currently
used. When this percentage is close to 100%, the NBG-419N is running at full load,
and the throughput is not going to improve anymore. If you want some applications
to have more throughput, you should turn off other applications (for example,
using bandwidth management.
This shows what percentage of the heap memory the NBG-419N is using.
This shows the web configurator mode you are viewing - Expert.
This displays the NBG-419N port types. The port types are: LAN and WLAN.
39) to which the NBG-419N is set -
39) to which the NBG-419N's
NBG-419N User's Guide