ZyXEL Communications NBG-419N User Manual page 223

For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP
4
tab.
For statically assigned settings, do the following:
5
• From the Configure IPv4 list, select Manually.
• In the IP Address field, type your IP address.
• In the Subnet Mask field, type your subnet mask.
• In the Router field, type the IP address of your device.
Click Apply Now and close the window.
6
NBG-419N User's Guide
Appendix C Setting Up Your Computer's IP Address
223