What You Can Do; What You Need To Know - ZyXEL Communications NBG-419N User Manual

Chapter 6 Easy Mode
Click Status to open the following screen screen.
Figure 28 Easy Mode: Status Screen
Go to
Network
Map
Screen

6.2 What You Can Do

You can do the following in this mode:
• Use this Navigation Panel
• Use the Network Map screen
gateway and whether it is connected to the Internet.
• Use the Control Panel
including wireless security, wireless scheduling and bandwidth management and so on.
• Use the Status Screen screen
NBG-419N, including the WAN IP, MAC Address of the NBG-419N and the firmware version.

6.3 What You Need to Know

Between the different device modes, the Control Panel
on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.
• WISP Mode: The available features for this mode are Game Console, Content Filter,
Bandwidth MGMT, and Firewall.
42
Navigation Panel
Status Screen
Control Panel
(Section 6.4 on page
(Section 6.5 on page
(Section 6.6 on page
(Section 6.7 on page
43) to opt out of the Easy mode.
43) to check if your NBG-419N can ping the
44) to configure and enable NBG-419N features,
51) to view read-only information about the
(Section 6.6 on page 44) changes depending
NBG-419N User's Guide