Configuration Screen - ZyXEL Communications NBG-419N User Manual

28.3 Configuration Screen

Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 128 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 78 Maintenance > Backup/Restore
LABEL
Backup
File Path
Browse...
Upload
Reset
NBG-419N User's Guide
DESCRIPTION
Click Backup to save the NBG-419N's current configuration to your
computer.
Type in the location of the file you want to upload in this field or click Browse... to
find it.
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
Note: Do not turn off the NBG-419N while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one
minute before logging into the NBG-419N again. The NBG-419N automatically
restarts in this time causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Pressing the Reset button in this section clears all user-entered
configuration information and returns the NBG-419N to its factory
defaults.
You can also press the RESET button on the rear panel to reset the
factory defaults of your NBG-419N. Refer to the chapter about
introducing the Web Configurator for more information on the
RESET button.
Chapter 28 Backup/Restore
175