ZyXEL Communications NBG-419N User Manual page 150

Chapter 21 Bandwidth Management
Table 68 Management > Bandwidth Management > Advanced (continued)
LABEL
Application List
#
Priority
Category
Service
Advanced Setting
User-defined
Service
#
Enable
Direction
Service Name
Category
Modify
Apply
Reset
150
DESCRIPTION
Use this table to allocate specific amounts of bandwidth based on a pre-defined
service.
This is the number of an individual bandwidth management rule.
Select a priority from the drop down list box. Choose High, Mid or Low.
• High - Select this for voice traffic or video that is especially sensitive to jitter
(jitter is the variations in delay).
• Mid - Select this for "excellent effort" or better than best effort and would
include important business traffic that can tolerate some delay.
• Low - Select this for non-critical "background" traffic such as bulk transfers
that are allowed but that should not affect other applications and users.
This is the category where a service belongs.
This is the name of the service.
Select the check box to have the NBG-419N apply this bandwidth management
rule.
Click the Edit icon to open the Rule Configuration screen where you can
modify the rule.
Use this table to allocate specific amounts of bandwidth to specific applications
or services you specify.
This is the number of an individual bandwidth management rule.
Select this check box to have the NBG-419N apply this bandwidth management
rule.
Select LAN to apply bandwidth management to traffic from WAN to LAN.
Select WAN to apply bandwidth management to traffic from LAN/WLAN to WAN.
Select WLAN to apply bandwidth management to traffic from WAN to WLAN.
Enter a descriptive name for the bandwidth management rule.
This is the category where a service belongs.
Click the Edit icon to open the Rule Configuration screen. Modify an existing
rule or create a new rule in the Rule Configuration screen. See
on page 152 for more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
Section 21.5.2
NBG-419N User's Guide