Prestige 861H User's Guide
Figure 14-7 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status screen.
If the upload was not successful, the following screen will appear. Click Back to go back to the
Firmware screen.
Figure 14-8 Error Message
See the Firmware and Configuration File Maintenance chapter for transferring configuration files
using FTP/TFTP commands.
14.6 Configuration Screen
Click Maintenance, and then the Configuration tab. Links to backup configuration, restoring
configuration, and factory defaults appear as shown next.
Figure 14-9 Maintenance Configuration
14.6.1 Backup Configuration
Backup configuration allows you to back up (save) the Prestige's current configuration to a file on
your computer. Once your Prestige is configured and functioning properly, it is highly recommended
that you back up your configuration file before making configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Click Backup to save the Prestige's current configuration to your computer
14-8
Maintenance