Search And Scan Mode - AOR AR7000 Manual

between channel number and bank number. Rotate the main dial to select the
desired memory channel and bank number for the distant memory channel. Press
[ENT]
{figure 73}
C Executing the swap
Now that both source memory and distant memory channel have been selected,
press the [ ] and [ ] keys to move the cursor ">" next to the legend "Swap" then
press [ENT]. The memory contents of each channel are now swapped.
{figure 74} {figure 75}
D Exit from the swap
To return to the "Memory Function" menu, either press the [ESC] key or move the
cursor ">" to the "QUIT" legend then press [ENT] to terminate the swap session. You
are now back to the memory function menu.
{figure 76}
3.5.5 Bank delete
Move the cursor ">" along side the "Bank Del" legend of the "Memory Function" menu
then press [ENT]. When "Bank Del" is selected, the bank number (currently
displayed as "- -") will reverse to a negative image. Rotate the main dial or press the
[ or keys to select the desired memory bank from which you wish to erase the
contents. Press the [ENT] key to delete all memory data from the selected memory
bank. All memory channels (of the selected bank) will be deleted in one go and the
cursor will move back along side the "Bank Del" item of the menu.
{figure 77}
3.5.6 Terminate the memory edit
To return to memory channel mode, either press the [ESC] key or move the cursor
">" to the "QUIT" legend then press [ENT] to terminate the session. You are now
back to the memory function menu.
{figure78}
4 Search and Scan
4.1 Definition and convention
It is important to understand the fundamental difference between SEARCH and
SCAN modes.