Starting Program Search; Reversing The Direction Of Search; Forcing The Search To Resume; Stopping The Search - AOR The Superior AR820 0 Series Operating Manual

To assist testing in the factory, several search banks may be programmed with data (which can be easy
deleted or over-written). This pre-programming is useful to ease familiarisation during the early days of
operation... so that when you push a key there is something already programmed to work!

8-2 Starting program search

Presuming that data is already stored into a search bank...
the
process. The LCD legend "SRCH" will be displayed and as
long as the squelch is closed, the search process will start
from the lower frequency limit and will progress toward the
upper frequency limit. When the program limit is reached,
the search loops around and starts the process again.
Note: If no search banks have been
programmed, the search process will not operate.
8-2-1 Reversing the
direction of search
To reverse the direction of
search use the main dial
or keys, this is useful
to enable you to search
back over and over an
interesting point of the
search process.

8-2-2 Forcing the search to resume

If the AR8200 stops on an unwanted busy frequency,
main dial to force the search process to resume from the current frequency displayed.

8-2-3 Stopping the search

While the search process is in progress (not stopped),
the current frequency to the single VFO for monitoring or tuning from. To exit the search process
the
data on-screen before search was started).
key to start the program search
key for memory read mode or the
Section 8-1-1, 8-2, 8-2-1, 8-2-2, 8-2-3
the key or use the
to stop searching and transfer
key for 2VFO mode (displaying the
keys or
75