Setting The Printer Driver - Oki C542dn User Manual

Setting the Printer Driver

When the additional tray unit is installed, be sure to set the number of trays after the printer
driver is installed.
For the information of installing the printer driver, see
Computer".
• To follow this procedure, you must log in to a computer as the administrator.
• If your Mac OS applies to the following conditions, the information about the installed option is automatically obtained,
not requiring you to set the printer driver.
- When the machine is connected to a network over Bonjour
- When the machine is connected via USB interface
- When the optional equipment is installed before the printer driver is installed
• Setting Additional Tray(s) to the Windows PCL Printer Driver
1
Click [Start], and then select [Devices and Printers].
2
Right-click [OKI C542], and then select [OKI C542 PCL6] from [Printer
properties].
3
Select the [Device Options] tab.
"Installing a Driver and Software to a
4
Enter the total number of trays and then click [OK].
If a TCP/IP network connection is used, click [Get Printer Settings] to set the number of trays automatically.
• Setting Additional Tray(s) to the Windows PS Printer Driver
1
Click [Start], and then select [Devices and Printers].
2
Right-click [OKI C542], and then select [OKI C542 PS] from [Printer
properties].
3
Select the [Device Settings] tab.
- 24 -
2. Setting Up