Power Connection; Ink Cartridges; Installing - Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual

Connect the printer to the computer with a bi-direction-
al printer cable. Secure the printer cable (1) to the con-
nectors on the printer (2) and on the computer (3).
2
Note:
When using your printer with a Macintosh com-
puter, connect the printer to the Macintosh us-
ing a SCSI interface module. See Appendix A in
the User Guide for more information.

Power connection

1. Insert the power cable into the power socket on
the printer. Make sure that the power cable is
securely seated in the socket.
2. Insert the free end of the power cable into a suita-
ble AC power source (such as a wall socket).
8
3
1
Note:
Power to the printer is completely cut off only
when the power cable is disconnected. Place the
printer where you can easily disconnect it from
the power source.

Ink cartridges

Installing

Caution:
You must leave at least one cartridge holder empty for the
printer to operate properly. Do not install more than 7 ink
cartridges.
You may install any ink cartridge in any of the 8 car-
tridge holders using a maximum of 7 ink cartridges.
Oki DP-5000