Installing Toner Cartridges - Oki OKIPAGE 8c Setup Manual

Installing Toner Cartridges

There are four toner cartridges for your printer. Each is marked
(1) with its colour: black, cyan, magenta and yellow. You may
also identify each by looking into the end of the cartridge
through the white cap (2) at one end.
It is essential that each toner cartridge is installed onto
the correct image drum cartridge for its colour.
1. Remove a toner cartridge from its packaging.
2. Gently shake the cartridge from side to side to evenly
distribute the toner along its length.
3. Identify the toner colour by inspecting the coloured tab
(1) on the cartridge or by looking into the end of the
cartridge through the white cap (2) at one end.
2
4. Identify the position of the corresponding image drum
cartridge inside the printer.
10
1
3
5. Peel off the white adhesive tape seal from the underside of
the toner cartridge.
6. Holding the cartridge with the coloured lever (3) to the
right and the white end cap (2) to the left, lower the toner
cartridge into the top of the image drum cartridge, white
cap end first.
Press gently down on the other end to locate the cartridge
firmly onto the image drum cartridge.
Do not force the toner cartridge into position. It is fitted
with a lock-out mechanism to prevent insertion into the
wrong image drum cartridge.
OKIPAGE 8c