Xerox 4595 User Manual page 48

2. C op y
2 - 2 2
When Standard Size is Selected
Select the paper size from standard sizes and select the paper
type.
Select Standard Size.
1.
2. Select the paper size and paper type.
NOTE: Select up button to display the previous screen and select
the down button to display the next screen.
3. Select Save to save the changes.
When Non-standard Size is Selected
Set the width (X) within the range from 5.9 to 19.2 inches (140 to
400 mm) and the height (Y) within the range from 4.0 to 12.9
inches (100 to 330 mm) in 0.1 inches or 1 mm increments.
KEY POINT: Printing may not be performed correctly when the X
(horizontal) direction of a non-standard size paper is less than 5.7
inches (148 mm).
When copying both sides on a non-standard size paper, specify
the size within the range from 7.2 to 19.2 inches (182 to 488 mm)
for the X (horizontal) direction and from 5.5 to 13.0 inches (140 to
330 mm) for the Y (vertical) direction.
1. Select Non-standard Size.
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e