Xerox 4595 User Manual page 399

Category
Error Code
C P S M O
016-748
016-749
016-755
016-756
016-757
016-758
016-759
016-760
016-761
016-762
016-764
016-765
016-766
016-767
X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Cause and Remedy
Printing is not possible due to insufficient hard disk
Cause
space.
Reduce the number of pages of print data, for example,
Remedy
by dividing up the print data or printing one copy at a
time when making multiple copies.
A PJL command syntax error occurred.
Cause
Either confirm the print settings, or correct the PJL
Remedy
command.
Attempted to process PDF file which was specified to
Cause
printing prohibited.
Cancel the printing prohibited specification using Adobe
Remedy
Reader and try to print again.
No permissions to use the service.
Cause
Check with your System Administrator.
Remedy
Password is incorrect.
Cause
Enter the correct password.
Remedy
No Permissions to use service.
Cause
Check with your Auditron Administrator.
Remedy
Maximum number of pages for this service has been
Cause
reached.
Check with your Auditron Administrator.
Remedy
An error occurred during PostScript processing.
Cause
Take one of the following actions:
Remedy
Set Print Mode to Speed Priority.
Increase PostScript memory.
For information about Print Modes, refer to the print driver's online
help. For information about memory, refer to "Allocate Memory" in
the System Administration Guide.
An error occurred during image processing.
Cause
Set the Print Mode to Speed Priority and start printing
Remedy
again. If this does not remedy the error, print in the Ensure
Print mode.
A print language not installed on the machine was
Cause
specified.
In Specify Print Mode under Port Settings, specify a
Remedy
print language.
Could not connect to the SMTP server.
Cause
Contact the SMTP server administrator.
Remedy
Could not send mail as the hard disk on the SMTP
Cause
server was full.
Contact the SMTP server administrator.
Remedy
An error occurred on the SMTP server.
Cause
Contact the SMTP server administrator.
Remedy
Could not send mail as the mail address was wrong.
Cause
Check the mail address and transmit again.
Remedy
11 . P r o b le m S o l vi n g
11-37