Xerox 4595 User Manual page 124

3. Sc a n
3- 4
Document Glass
The document glass accepts single-sheet or book form
documents of sizes up to 297 × 432mm (A3, 11 × 17 inches).
The document glass can auto-detect only documents of standard
sizes. For documents that of not of a standard size, input the size
in the Scan Size field.
For information about entering document sizes, refer to "Scan
Size (Specifying a Scanning Size)," page 3-41.
NOTE: The standard document sizes that can be auto-detected
depend on the Paper Size Settings in the System Administration
mode. For more information, refer to "Paper Size Settings" in the
System Administration Guide.
CAUTION: When copying a thick document, do not use
excessive force to press it against the document glass. The glass
may break and cause an injury.
WARNING: When making copies with the document cover open,
avoid looking directly at the copy lamp. Direct eye exposure can
cause eye fatigue or damage.
1. Open the document cover.
Place the document face down, and align it against the inside
2.
left corner of the document glass.
Close the document cover.
3.
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e