11 . P r ob l e m S ol v i n g
11 - 9 0
Remove the jammed staples as shown in the illustration.
4.
WARNING: Be careful when
removing jammed staples to
avoid hurting your fingers.
Holding the tabs of the booklet staple cartridge, return the
5.
cartridge to the original position and gently push it until it
clicks.
Return the unit to its original position.
6.
Close the Finisher right cover.
7.
NOTE: A message will be displayed and the machine will not
operate if the right cover is even slightly open.
If the staples cannot be removed after carrying out the above
procedures, contact the Customer Support Center.
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e