Xerox 4595 User Manual page 119

X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Delete inside
Deletes the selected areas and copies them.
Area Settings
Displays the Delete Outside/Delete Inside - Area X screen. The
maximum number of areas you can select is 3.
NOTE: X displays an area number.
Original with target areas
You can specify side 1, side 2 or both sides as extract or delete
areas in 2-sided copies.
• Both Sides
Targets both sides. Scanned reversely.
• Side 1 Only
Targets side 1.
• Side 2 Only
Targets side 2.
Delete Outside/Delete Inside - Area X screen
This feature allows you to specify the areas for extracting or
deleting. The quadrangle with a diagonal line and four straight
sides connecting the coordinates, X1/Y1 and X2/Y2 is the deleted
or extracted area. By making the top right corner of a document
into the starting point, the X-axis is set as the direction of width,
and the Y-axis is set as the direction of length.
You can specify a value of 0 - 17.0 inches (0 to 432 mm) for the
width (X) and the length (Y), in 0.1 inch (1 mm) increments.
NOTE: Specify the 2 coordinates from the top right corner of the
document.
When specifying multiple areas, it is also possible to
overlap and specify an area.
When selecting Reduce/Enlarge, areas are reduced or
enlarged by interlocking magnification.
2. Co p y
2-93