Xerox 4595 User Manual page 29

X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Document Glass
On the document glass, you can place a single sheet, or a book or
other similar document, up to 297 × 432 mm (A3, 11 × 17 inches).
On the document glass, only standard size documents can be
detected automatically. For non-standard size documents, enter a
custom size in Original Size.
For information about entering a custom size, refer to "Original
Size" on page 2-34.
NOTE: The standard document sizes that can be auto-detected
depend on the Paper Size Settings in the System Administration
mode. For more information, refer to "Paper Size Settings" in the
System Administration Guide.
CAUTION: When copying a thick document, do not use
excessive force to press it against the document glass. The glass
may break and cause an injury.
WARNING: When making copies with the document cover open,
avoid looking directly at the copy lamp. Direct eye exposure can
cause eye fatigue or damage.
Open the document cover.
1.
Place the document face down, and align it against the
2.
upper left corner of the document glass.
3. Close the document cover.
NOTE: When a standard size document is placed on the
document glass, the size of the document is displayed in the
message area.
2. Co p y
2-3