Changing Waypoint Mark Size (Furuno, Navcharts™) - Furuno 1722C Operator's Manual

3.8.4 Changing waypoint mark size (FURUNO, NavCharts™)
You may change the size of all waypoint marks to small or large (default), or you
may turn them off.
1. Press the [MENU] key to open the menu.
2. Press the CHART SETUP and CHART DETAILS soft keys.
LAT LON GRID
TEXT INFORMATION
WAYPOINTS
WAYPOINT NAMES
CHART BORDER LINES
LANDMASS
BACKGROUND
NAVAIDS
LIGHT SECTOR INFO
OTHER SYMBOLS
MARKS SIZE
3. Use the cursor pad to select WAYPOINTS.
4. Press the EDIT soft key.
5. Use the cursor pad to select LARGE, SMALL or OFF.
LARGE: Shows mark in actual shape.
SMALL: Displays all waypoints with an "X" regardless of mark shape
OFF:
6. Press the ENTER soft key or [ENTER] knob to register your selection.
7. Press the [MENU] key to close the menu.
CHART
DETAILS
GREEN
EDIT
ON
LARGE
CNTOUR
ON
ON
BRT YELLOW
BLUE
RETURN
ON
ON
WHITE
LARGE
MODEL1722C series
Chart details menu
selected.
Turns off all waypoints and their names. Waypoints which are part
of a route are always shown regardless of this setting.
LAT LON GRID
ON
TEXT INFORMATION
ON
WAYPOINTS
LARGE
LINE
WAYPOINT NAMES
ON
CHART BORDER LINES
ON
LANDMASS
ON
NAVAIDS
ON
LIGHT SECTOR INFO
ON
OTHER SYMBOLS
ON
MARKS SIZE
LARGE
MODEL1722 series
3. PLOTTER OPERATION
CHART
DETAILS
EDIT
CNTOUR
LINE
RETURN
3-35