Erasing Track - Furuno 1722C Operator's Manual

3.6.6

Erasing track

This paragraph shows you how to erase own ship's track and target tracks. You
can erase ship's track three ways: collectively, by color (color model only) and by
area.
Erasing own ship track by area
You can erase own ship's track by area as below. This function is not available
on the overlay display (MODEL1722C series).
1. Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS
CONTROL and ERASE T & M soft keys to show the ERASE menu.
SHIP'S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK :
2. Use the cursor pad to select ERASE TRACKS BY AREA and press the EDIT
soft key. The menu is erased and the plotter display appears.
3. Use the cursor pad to place the cursor at the top left of corner which you
want to erase track from.
4. Press the START soft key or the [ENTER] knob.
5. Drag the cursor diagonally to the bottom right corner of the area which you
want to erase track from.
6. Press the END soft key or the [ENTER] knob. You are asked if it is all right to
delete the track.
7. Push the [ENTER] knob to delete the track selected.
8. Press the [MENU] key twice to close the menu.
ERASE ALL TRACKS
ERASE TRACKS BY AREA
ERASE TRACKS BY COLOR
ERASE TARGET TRACKS
ERASE ALL MARKS/LINES
ERASE MARKS BY AREA
9/6000
MODEL1722C series
ERASE ALL TRACKS
ERASE
ERASE TRACKS BY AREA
EDIT
ERASE TARGET TRACKS
ERASE ALL MARKS/LINES
ERASE MARKS BY AREA
RETURN
SHIP'S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK : 9/6000
MODEL1722 series
Erase menu
3. PLOTTER OPERATION
ERASE
EDIT
RETURN
3-23