4.5
Measuring Depth, Time
The VRM functions to measure the depth, and the time cursor measures time.
1. Rotate the [ENTER] knob to shift the VRM; counterclockwise the shift it
downward, clockwise to shift it upward. You may also use the cursor pad to
shift the VRM, in which case use ▲ or ▼.
2. Use ◄ or ► on the cursor pad to shift the cross-hair cursor to measure time.
Note: If, when the range setting is over 1000 ft (m, fa, p/b), the VRM indication
and depth scale may overlap one another, shift the cross-hair cursor
slightly to show them completely. Further, when the display is shifted, the
depth scale may obscure the time indication.
Time to cursor intersection
(Max. 99'59")
Depth to VRM
0'33"
28.8
Cross-hair
cursor
84
50k
How to use the VRM, time cursor
4. VIDEO SOUNDER OPERATION
0
-
VRM
-
-
-
50
-
-
-
-
100
-
-
4-11