Contrast; Hue (Model1722C Series) - Furuno 1722C Operator's Manual

1. OPERATIONAL OVERVIEW
1.5.2

Contrast

1. Press the [POWER/BRILL] key momentarily.
2. Press the CONTST (monochrome) or CONTST/HUE (color) soft key.
3. For MODEL1722C series, two soft keys appear at the pressing of the
CONTST/HUE soft key: CONTST and HUE. Press the CONTST soft key to
adjust the contrast.
4. Adjust the [ENTER] knob, clockwise to raise the setting or counterclockwise
to decrease it. You may also use the CONTST soft key, in which case the
item selected is adjusted cyclically, from low to high. 16 levels (monochrome)
and 10 levels (color) of contrast are available.
5. Press the RETURN soft key to finish.
1.5.3

Hue (MODEL1722C series)

1. Press the [POWER/BRILL] key momentary.
2. Press the CONTST/HUE soft key.
3. Press the HUE soft key to show the hue setting window.
4. Operate the cursor pad or [ENTER] knob to select hue desired, referring to
the table below. MANUAL SET follows the color settings on the RADAR
DISPLAY SETUP for the radar, CHART DETAILS menu for the plotter and
SOUNDER MENU for the sounder.
Characters
Radar ring
Radar echo
Background
Landmass
5. Hit the RETURN soft key to finish.
Note: When using the overlay screen, the own ship track will be hidden if the
radar background and own ship track are blue and the "MANUAL" hue
setting is used. In this case, set HUE to other position and then return to
"MANUAL" to show the own ship track in black.
1-10
CONTRAST
Contrast window
HUE
¡
DAY
¡
NIGHT
¡
TWILIGHT
¤
MANUAL SET
Hue window
Day Night
Black Red
Green* Red
Orange Red
White Black
Yellow Light Yellow
8
Twilight Applicable mode
Green Plotter, radar, sounder
Green* Radar
Yellow Radar
Blue Plotter, radar
Dim Yellow Radar
*: Red on C-map