Radar Range Setup - Furuno 1722C Operator's Manual

5. CUSTOMIZING YOUR UNIT
5.2.2

Radar range setup

You may choose the radar ranges you wish to use, from the RADAR RANGE
SETUP menu. (Available ranges depends on the network radar used.) After
choosing the ranges desired change the range with the [RANGE] key to activate
range settings.
At least two ranges (excluding maximum range) must be turned on. When less
than two ranges are turned on, you cannot escape from the range setup menu.
Note that the previous setting returns to the default setting when you change the
unit type.
1. Press the [MENU] key to show the main menu.
2. Press the RADAR RANGE SETUP soft key to show the RADAR RANGE
SETUP menu.
12nm
16nm
24nm
36nm
48nm
64nm
MAXIMUM RANGE XXnm
* = Max. range depends on network radar used and is set on the network radar at installation.
3. Use the cursor pad to select the range which you want to turn on or off.
4. Press the ON/OFF soft key to turn the range on or off as appropriate.
5. Press the RETURN soft key to register the setting.
6. Press the [MENU] key to close the menu.
5-6
0.125nm ON
0.25nm ON
0.5nm ON
0.75nm ON
1nm OFF
1.5nm ON
2nm OFF
3nm ON
4nm OFF
6nm ON
8nm OFF
ON
OFF
ON
ON
OFF
OFF
*
Range unit: nm
Radar range setup menu
MODEL1722/1722C
MODEL1732/1732C
MODEL1742/1742C
MODEL1762/1762C
RANGE
0.25km
SETUP
0.5km
0.75km
ON/OFF
1km
1.5km
2km
3km
4km
6km
8km
12km
16km
24km
36km
RETURN
48km
64km
MAXIMUM RANGE XXnm
Range unit: km
Max. range
24 nm
36 nm
36 nm
48 nm
RANGE
ON
SETUP
ON
ON
ON/OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
RETURN
OFF
OFF
*
24 km
36 km
36 km
48 km