7. Press the [MENU] key to close the menu. An acquisition area of 2.0 to 2.5
miles in range and ±45º on either side of the heading line in bearing appears.
Note: Targets being tracked in automatic acquisition are continuously
2.25.3
Displaying target number (internal, external ARP)
Target number can be shown for ARP and TTM targets as below.
1. Press the [MENU] key.
2. Press the ARP SETUP soft key.
3. Select TARGET ID NUMBER.
4. Press the EDIT soft key.
5. Select ON or OFF (default setting) as appropriate.
6. Press the ENTER soft key.
7. Press the [MENU] key to close the menu.
tracked when switching to manual acquisition.
45 port
2.0 - 2.5 nm
Automatic acquisition area
.250/
H-UP
ARP
Target
Number
Automatic acquisition area
45 starboard
.125nm
319.9
T
SP
01
ARP target number
2. RADAR OPERATION
TARGET
TRAIL
TLL
OUTPUT
ACQ
TARGET
INFO
RETURN
359.9 R
+
0.240nm
2-37