Changing Waypoint Mark Size (Navionics Gold) - Furuno NAVNET 1824C Operator's Manual

Erasing a waypoint from the menu
1. Press the MENU key followed by the WAYPOINTS/ROUTES and WAYPOINTS soft key
to open the waypoint menu.
2. Press the WAYPOINT BY CURSOR soft key.
3. Operate the Trackball to place the cursor on the waypoint which you want to erase. A
flashing diamond mark appears on the waypoint when it is correctly selected.
4. Press the EDIT/MOVE soft key followed by the ERASE WPT soft key. You are asked if
you are sure to erase the waypoint.
5. Push the ENTER knob to erase the waypoint.
6. Press the MENU key to close the menu. The waypoint is erased from the plotter screen
and the waypoint list.
Erasing a waypoint from the waypoint list
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST or ALPHANUMERIC LIST soft key.
4. Use the Trackball to select the waypoint you want to erase.
5. Press the ERASE WPT soft key. You are asked if you are sure to erase the waypoint.
6. Push the ENTER knob. The waypoint is erased from both the waypoint list and the
plotter screen (if it is currently displayed).
7. Press the MENU key to close the menu.

3.8.4 Changing waypoint mark size (Navionics GOLD)

You may change the size of all waypoint marks to small or large (default), or you may turn
them off.
1. Press the MENU key to open the menu.
2. Press the CHART SETUP and CHART CONFIGURATION soft keys.
3. Use the Trackball to select WAYPOINTS.
4. Press the EDIT soft key.
LAT/LON GRID GREEN
TEXT INFORMATION ON
WAYPOINTS LARGE
WAYPOINT NAMES ON
CHART BORDER LINES ON
LANDMASS BRT YELLOW
BACKGROUND BLACK
NAVAIDS ON
LIGHT SECTOR INFO ON
OTHER SYMBOLS WHITE
MARK SIZE LARGE
Chart details menu
3. PLOTTER OPERATION
CHART
CONFIG
EDIT
CNTOUR
LINE
RETURN
3-31