Programming Chime Zones - Paradox Digiplex DGP-610 User Manual

7.2 P
ROGRAMMING
You can program the keypads to emit a rapid, intermittent beep whenever
designated zones are opened or only when opened between certain
hours. These zones are referred to as Chime Zones. Each keypad must be
Chime programmed separately. Your installer can program your Chimed
zones to also beep upon closure.
7.2.1 Activating a Chime Zone
How do I program a keypad to beep every time a zone opens?
1) Enter your [
The keypad will emit a Confirmation Beep. The [
2) Press the
The keypad will emit a Confirmation Beep. The [
Symbol(s) will flash.
3) Press the
The keypad will emit a Confirmation Beep. The [
already Chimed zones will illuminate.
4) Enter the two-digit zone number(s) you want to designate as Chimed.
The keypad will emit a Confirmation Beep and the Numerical Symbol(s)
corresponding to the zone(s) will illuminate. If you re-enter the number of
an illuminated Numerical Symbol, the corresponding zone will unchime
and the Numerical Symbol will extinguish.
5) Press the
C Z
HIME
].
ACCESS CODE
button to enter the Chiming Menu.
button.
button to exit.
ONES
] Symbol will flash.
ACCESS
] Symbol and Area
PRG
] Symbol and any
PRG
Digiplex LED Keypads 39