Paradox Digiplex DGP-610 User Manual page 39

7.2.2 Setting a Chime Zone time period
How do I program all the keypad's Chimed zones to beep only
when they open between specific hours?
1) Enter your [
The keypad will emit a Confirmation Beep. The [
2) Press the
The keypad will emit a Confirmation Beep. The [
Symbol(s) will flash.
3) Press the
The keypad will emit a Confirmation Beep. The [
Numerical Symbol will illuminate. The Numerical Symbol represents the
first number of the previously set time ([10] Symbol = zero). When the
[A2] and [A3] Symbols flash, no time is set.
4) Enter the time you want all Chimed zones to start beeping when
they open according to the 24-hour clock (i.e. 9 a.m. is 09:00 and 9
p.m. is 21:00).
The keypad will emit a Half Beep.
5) Enter the time you want all Chimed zones to stop beeping when they
open according to the 24-hour clock. If you want the Chimed zones to
beep every time they open, enter the same time set in Step 4.
The keypad will emit a Confirmation Beep.
6) Press the
40 User's Manual
].
ACCESS CODE
button to enter the Chiming Menu.
button.
button to exit.
] Symbol will flash.
ACCESS
] Symbol and Area
PRG
] Symbol and a
PRG