Paradox Digiplex DGP-610 User Manual page 19

3.9.1 Zone Bypass
How do I activate the Zone Bypass feature for a zone?
1) Enter your [
The keypad will emit a Confirmation Beep. The [
2) Press the
The [ ] Symbol will illuminate and the [
PRG
3) Enter the two-digit number(s) of the zone(s) you want to Bypass and
the corresponding number(s) will illuminate. If a zone's number is
illuminated and you re-enter its number, the zone will unbypass and the
number will extinguish.
If a zone's number does not illuminate and the keypad emits a Rejection
Beep, the zone may not have the Bypass feature accessible.
4) Press the
The [ ] Symbol will remain illuminated.
BYP
3.9.2 Bypass Recall
Bypass Recall reinstates all the zones that had Zone Bypass activated the
last time the system was armed.
If you have a Partitioned System, only the zones in the area(s)
assigned to your User Access Code will be affected.
20 User's Manual
].
ACCESS CODE
button.
button to exit.
] Symbol will flash.
ACCESS
] Symbol will flash.
BYP