Paradox Digiplex DGP-610 User Manual page 27

6) Program the User Options (see Table 1) by turning ON or OFF the
options. Once the options are programmed, press
Area Assignment.
The keypad will emit a Half Beep when it switches to Area Assignment.
Pre-existing assignments will illuminate.
7) Program the Area Assignment (see Table 2). Press
User Options or press
The keypad will emit a Confirmation Beep to confirm the code's acceptance.
If the keypad emits a Rejection Beep, you may have chosen an existing
User Code or the Master Code used to modify or create the code does not
have access to the User Options or Area Assignment programmed.
To view the code programmed, instead of entering the User Code in Step
5, the first number of the code programmed will illuminate. Press the
button and the numbers will illuminate one at a time as you press the
button (the Numerical Symbol [10] represents zero).
In Table 1 and Table 2 the User Code Option or Area is considered ON
when the corresponding Numerical Symbol is illuminated. You turn
the Numerical Symbols ON and OFF by pressing the Numerical
Buttons on the keypad.
28 User's Manual
to save and exit.
to reach the
to return to