Paradox DGP-641 User Quick Reference Manual

ACCESS CODES
: Enter [ ] Table 1: User Options
STEP 1 ACCESS CODE
[1] [2] : Master
: Press
ON OFF
STEP 2
Modifies User Codes only
: Press
STEP 3
[1] [2] : Full Master
ON ON
Modifies User Codes, User
: Enter the 2-digit User
STEP 4 Options, and Area Assignment
Number or scroll list,
[3] : Duress
ON
and press
Code used to send silent alarm
when forced to arm/disarm system
: Enter new User Code
STEP 5
[4] : Bypass
ON
Can use Bypass Programming
[5] : Arm only
ON
Cannot disarm
: Program User Options from
STEP 6
[6] : Stay & Instant Arm
ON
Table 1 then press
Can Stay or Instant Arm
[7] : Force Arm
ON
Can Force Arm
[8] : Keypad obeys code
ON
Keypad allows access to area(s)
: Program Area Assignment
STEP 7 assigned to code
from Table 2 then press
[8] : Code obeys keypad
OFF
Code only allowed access to
Keypad's assigned area(s)
In Steps 6 and 7:
Table 2: Area Assignment
When the number appears in the
[1] : Access to Area 1
ON
brackets, the number is and
ON
[2] : Access to Area 2
the feature or area is accessible.
ON
[3] : Access to Area 3
ON
Security Company:
[4] : Access to Area 4
ON
( )
All : Code controls PGM only
OFF
PRINTED IN CANADA 10/99 K641EQ-01
User's Quick Reference Guide
"AC" LIGHT
The LCD screen will
guide you through
= AC power
ON
the operations
= Power failure
OFF
"STATUS" LIGHT
Use arrow buttons to
Green:
scroll menu or choices
= Zones closed
ON
= Zone(s) open
OFF
= Exit Delay
FLASH
Red:
= Area(s) armed
ON
= Area(s) disarmed
OFF
= Alarm
FLASH
DGP-641
ARMING AND DISARMING
To arm To arm
when leaving: when staying:
Enter [ ] then press:
ACCESS CODE
*
*
To Regular Arm To Stay Arm
(Arms entire Area) (Arms Area's perimeter)
[
One-touch Button, if enabled: One-touch Button,
*
To Force Arm To Instant Arm
(Arms Area without waiting for all (Stay Arms Area, but if any zones are
zones to close) breached, it will instantly cause an alarm)
[
One-touch Button, if enabled: One-touch Button,
To Disarm To Disarm
(when entering) (from within perimeter)
Enter [ ] Enter [
ACCESS CODE ACCESS CODE
*
Then choose an area to arm or disarm if necessary
[
if enabled:
*
[
if enabled:
*
] and press