Confidential Mode; Programming Chime Zones - Paradox K656 Touch Sense User Manual

Confidential Mode

Your installer can program keypads not to display the
status of your system automatically by changing the
keypad to Confidential Mode.
In Confidential Mode:
• The zones and status messages will NOT be displayed
• The indicator lights will NOT illuminate
• Depending on how your keypad was programmed by
your installer, you must either press a button or enter
your user code to illuminate the indicator lights and
return to Normal Mode.
Programmable Outputs (PGMs)
Your system includes PGMs (programmable outputs) that
can be programmed by your installer. A PGM is triggered
when a predetermined event or series of events occurs in
your system. PGMs can be programmed to reset smoke
alarms, turn on light switches, open or close garage doors
and much more. Ask your installer about this useful
feature.

Programming Chime Zones

You can program the keypad to emit a rapid, intermittent
beep tone whenever designated zones are opened or
only when opened between certain hours. These zones
are referred to as Chime Zones. Your installer can also
program your Chime zones to beep upon closure.
To program chime zones:
1) Press [
MENU
2) Enter your user code.
3) Press [1] to chime a zone. Enter the number
corresponding to the zone to be chimed, or use the
^
[ ] and [ ] buttons to scroll the list of zones. Press
the [
ENTER
appears on the screen. Press [
OR
Press the [2] button to set the time period a chimed
zone will beep. Enter the time that the chimed zone(s)
Overview
] > [6]
CHIMING
] button to chime or unchime the zone that
.
] to save.
CLEAR
Page 9