Programming Chime Zones - Paradox Digiplex DGP2-648 User Manual

Fire Panic
When you press the [7] and [9] keys at the same time and hold them
for two seconds, the system will generate an alarm. The alarm can
be programmed to be either silent or audible according to your
preference.
9.3 P
ROGRAMMING
You can program your keypad to emit a rapid, intermittent beep
whenever designated zones are opened or only when opened
between certain hours. These zones are referred to as Chime Zones.
If you have several keypads, they must each be programmed
separately. Your installer can program your chimed zones to also
beep upon closure.
9.3.1 A
CTIVATING A
How do I program my keypad to beep every time a zone
opens?
1) Enter your [Access Code]. Your keypad will emit a Confirmation
Beep. The A
2) Press the [9] key to enter the Chiming Menu. Your keypad will
emit a Confirmation Beep. The P
will flash.
3) Press the [1] key. Your keypad will emit a Confirmation Beep.
The P action light and any already chimed zones will
RG
illuminate.
C
HIME
C
HIME
action light will flash.
CCESS
Z
ONES
Z
ONE
action light and area light(s)
RG
Digiplex/DigiplexNE LED Keypads 33n