Instant Arming - Paradox Digiplex DGP-610 User Manual

How do I Stay Arm?
1) Enter your [
The keypad will emit a Confirmation Beep. The [
2) Press
If you have access to more than one area, press the Number Button
representing the area you want to Stay Arm or [0] for all assigned areas.
After the Confirmation Beep, the Exit Delay Timer will begin the count-
down to arming.
If enabled by your installer, the One-Touch Buttons (section 3.6) or
a keyswitch (section 3.7) can also be used to arm the area.
3.4 I A
NSTANT
This feature is similar to Stay Arming. Instant Arming will partially arm your
system to permit you to remain in the protected area, but all zones, including the
entry/exit point, are changed to instant alarm zones. Therefore, if any armed
zone is breached, the alarm will instantly be triggered. Only User Access Codes
with the Stay and Instant Arm option enabled will be able to Instant Arm.
3.4.1 Instant Arming with Delay
Instant Arming with Delay functions like Instant Arming except the installer
can program certain armed zones within the protected area(s) with an
Entry Delay Timer. If these zones are accidently triggered, the timer will
start to allow you enough time to disarm the area(s).
14 User's Manual
].
ACCESS CODE
button.
RMING
] Symbol will flash.
ACCESS