User Access Codes - Paradox Digiplex DGP-610 User Manual

5.4 U A
SER CCESS
Your system can support up to 63 User Access Codes. All codes are given
a User Number between 02 and 64 (Code 01 is the System Master Code).
User Access Codes can be programmed with various options that will
allow you to control the access to your system. Only the System Master
Code and codes with the Master feature can program User Access Codes
with their User Options and Area Assignment.
How do I program a User Access Code?
1) Enter your [
System Master Code or User Access Code with the Master feature only.
2) Press
The Area Symbols of the areas assigned to your User Access Code and
the [ ] Symbol will flash.
PRG
3) Press the
The Area Symbols of the areas assigned to your User Access Code and the
[ ] Symbol will illuminate. The [
ACCESS
4) Enter the 2-digit User Number (02 to 64) you want to program.
The [
ACCESS
[ ] Symbol and first number of the code will illuminate. The [
PRG
Symbol and the Area Symbols will extinguish.
5) Enter a User Code. If you do not want to change an existing one,
press
The keypad will emit a Half Beep when it switches to User Options. Pre-
existing options will illuminate.
C
ODES
]
ACCESS CODE
to enter the User Programming Menu.
button.
] Symbol will flash for an unused code. If the code is used,
until you reach User Options.
] Symbol will continue to flash.
PRG
ACCESS
Digiplex LED Keypads 27
]